Cationic Bitumen Emulsion K3 Description
Bitumen Emulsion K3 cationic bitumen emulsion (medium setting) road emulsion that contains 57% bitumen, is black in color and is manufactured strictly as per KS 02-769: 1990 standard.
Bitumen Emulsion K3 is cold applied, liquid bitumen emulsions, used in the construction and repair of pavements, driveways, roads, and highways.
Cationic Bitumen Emulsion K3 Applications
For pavement bases and surfaces:
- Plant mix (cold): with open-graded aggregate
- Open-graded aggregate
- Crack Filler
- Immediate use
Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions.
Application Conditions of Cationic Emulsion Bitumen K3
Bitumen Emulsion K3 must only be applied in dry, frost-free conditions which will remain throughout the film drying period. Temperatures of between 5°C and 35°C should prevail.
Before application drums should be well rolled to agitate contents before use. Cationic emulsions should be applied by brushing with a hand broom or squeegee. Spread in one direction only and avoid scrubbing often. It is more practical to apply by spray as this provides uniform distribution and even film. Spray equipment should conform to BS3136: Specification for Cold Emulsion Spraying Machines for Roads.
Spray evenly to avoid ponding in hollows as this may cause localized “fatting up” of the subsequent courses.
All surfaces must be dry and free from dust, oil, grease, fuel spillage, mud, leaves, etc. In hot weather, it may be advisable to dampen the surface with water in order to retard the loss of water from the emulsion as it cures and to ensure better wetting of the surface by the emulsion. It is essential that the surface is free of standing water prior to and during application.
Bitumen Emulsion K-3 Packing
Bitumen Emulsion K3 is available in
- Bulk as IBC Tank, Flexi Tank
- Reconditioned steel drums 200 lit.
- New steel drums 200 lit.
Cationic Bitumen Emulsion K3 Specifications
|2||Residue on 710 um KS sieve (%)(m/m), maximum||0.05|
|3||Residue on 150 um KS sieve (g per 100 mL), maximum||0.15|
|4||Binder content (%)(m/m), minimum||57|
|5||Viscosity (degrees Engler (°E) at 20°C||10 max|
|6||Viscosity redwood No. II (s at 85°C)||–|
|7||Storage stability (long period test) % water content difference, maximum||2|