Description of Base Oil SN150
Base oil SN150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining, it was hydrogen treated to clear out any impurities. These products have good solubility characteristics for additives in product formulations.
SN 150, is base oil categorized in group I is a common quality base oil which uses in different applications base oils SN150 are used to manufacture products including lubricating greases, motor oil, and metal processing fluids, and many other applications One of the most important ISSUE is the viscosity at various temperatures.
Whether or not a crude oil is suitable to be made into a base oil is determined by the concentration of base oil molecules as well as how easily these can be extracted. This oil has no impurities or compounds that can have an adverse effect on the quality of the oil.
The lubricant base oils under the SN classification are GI base oils produced at our refineries. They are non-labelled products that are mainly used as the primary raw material in
formulating lubricating oils for industry in general. They are paraffinic, with low polycyclic aromatic content.
These base oils are obtained by direct distillation of highly paraffinic crude or by extraction with propane of the vacuum residue obtained with this type of crude These products, supported in suitable conditions of storage, in sealed containers and preserved from the water and other agents, does not suffer degradation.
Nevertheless, from the commercial point of view, we can indicate that the shelf life is four years from the date of manufacture
The main field of application for these base oils is the formulation of lubricating oils for automobiles, industry, maritime use, greases and other special applications. The wide range of viscosity levels of the SN series means it can cover all the most common lubrication needs of these applications. These base oils can also be used for the production of white oils and as a fluidifier in asphalt production
Base Oils are used to manufacture products including motor oil, Industrial oil, Grease and etc.
- General-purpose oils
- Mould oil
- Transmission fluids
- Gear Oils
- Metalworking fluids
- Hydraulic Oils
- Transformer Oils
Packed in new or used 210 kg drums, Iso tank, flexi Tanks, and IBC tank. Each 20-foot container takes 80 drums.
Specification of Base Oil SN150
|Flash Point ˚C
|Total Acid Number mgKOH/g